DIY Your Own Lightbox

A good quality photo is very important for your Etsy shop. Now build a cheap, home made light box. A Canon forum user share his DIY Lightbox.

This project need a cardboard box, some easel paper, and two light sources.

1, With your box on one side, cut out the middle of the left and right side, leaving a two-inch frame around the cuts.

2, Tape a piece of easel paper to the outside of the box, covering the cutouts.

3, Tape a third piece of easel paper to the inside rear of the box, leaving plenty of excess paper at the bottom.

4, Place a light on either side of the box and you're set to go! [ link ]




The build...


The parts list..




The test...






arrow
arrow
    全站熱搜

    kelvin820 發表在 痞客邦 留言(0) 人氣()